HuntingNet.com Forums - View Single Post - Question about cam lean.
Thread: Question about cam lean.
View Single Post
Old 02-13-2005 | 11:24 PM
  #5  
Bigpapascout's Avatar
Bigpapascout
Nontypical Buck
 
Joined: Feb 2003
Posts: 1,161
Likes: 0
From: In Teh Garage (Rossville, GA USA)
Default RE: Question about cam lean.
Cam lean is normally due to a bushing going bad or the hole in the cam was drilled wrong to begin with a bad bushing can be fixed, poor workmanship cannot.
Bigpapascout is offline  
Reply
0