What happens is their are little molding marks left on the quick connects when they are made and when you leave the bow undrawn for awhile the molding marks sort of fuse to the limb and the popping noise you hear is them breaking free. Put the bow in a press and remove the connectors. Sand the back of each one lightly with 80 grit sandpaper to remove the molding marks, put a drop of something like super lube on the back of them and then re-install. I will bet your problem will go away. I did the same thing to my lx, and problem solved. Hope this helps, and aim for the boiler room. Bhunter32.