I must say I am actually very happy to hear this report. After all of this talk about cam lean on the other thread I wondered about how prevelant it was. So I went home and looked at my other bows to see what I could find. I found that on my Merlin twin cam I had no noticeable lean statically, but at full draw there was cam lean[] (not my Merlin!!!). On my Hoyt single cam I noticed some slight lean in a static state and some very noticeable lean at full draw. This was not surprising due to it being a single with split limbs. I was a bit concerned about this so I pressed my Merlin and checked out the bushings and they seemed fine. I didn't take the axles out because I'm not comfortable doing that myself. With the results I found I was pretty worried that I had issues with my bows (not that I shoot well enough for it to effect me, but still). It's good to know that this is common and that even the highest quality limbs will experience some twisting.

Len thanks for your report. I don't know what schlubs like me would do without guys like you. I think I know just enough to get myself into trouble and worry about things I don't need to. Thanks again, great work.