RE: Bad Pro Shop
Taz, there are two ways to go. If you are comming from 395 South then get off at the Fort Belvoir exit. Take Route 1 North, pass Belvoir and it will be on the right about 2 miles or so. If you for some reason miss that first exit then you can take the second Fort Belvoir exit, you'll come off the ramp and be on the Fairfax Co. Parkway. Follow that down until you run into a dead end(which is Route 1). Make a left. You'll pass Belvoir and and in 2 miles or so you'll see the shop(next to NAPA). If you for some reason get off and run into the Palone dealership you went the oppisite way and you need make a U-turn. Thats way #1 and the quickest from I395S.
Way #2 would be to take 395 to 495 and go towards Baltimore. Get off on the exit thats says Rt1 South Fort Belvoir. You'll eventually run into Bowes and Arrows on the left. Just remember to look for NAPA auto parts. Way #2 is much longer than way #1. so try that....Let me know if you understand my directions.