Arroman, pdq,

According to CE's chart, the 4560 is the right arrow at 63#/28". But it is on the borderline. I was considering going to Gold Tip 55/75's just to get it more midrange.

pdq, on the Drop Tine model Biscuit the shaft from the Biscuit to the mounting bracket is square to prevent rotation, rather than round like the original. Because of this, it appears to me that rotating the rest at the mounting bolt will cause the biscuit to not be parallel to the string. The way this version is designed if the top of the bracket is set square, the hole in the biscuit lines up with the mounting holes.

I have had the nock point down at 3/16", and the arrow is definately more square to the string at that point. But the tear was still the same. That's what was confusing me, moving the nock point did not seem to change the tear. I will try it down at 3/16" again.

Thanks for the advice.