I think I figured it out. They manual says not to cross the cables on the top because if you cross them with the cable slide the way it comes stock, they will rub. All you need to do is flip it over and it works. The some thing for the muzzy. Just use the cable guide so the longer slot is in the front, not the back and cross the cables on the top instead of the bottom. I did this earlier and the rest works now. I looked at before I changed it, and after and it doesn't seem to change the geometry of the cables that much.

I would still be interested in hearing some input from someone at bowtech about the subject. I would hate void my warranty or something.

Good luck,
Paul