Guys I need some help. Got an Outback that has been too two different pro shops and just came back from Mathews. It will not go above 66 lbs (70 lbs limbs), the nock point changes daily and it seems unusally loud, and no big deal but the string supressors came from the factory installed backwards( idler on the cam and cam on the idler). We got on the phone with Brett and Jeff at mathews and they said they could not find anything wrong with the bow and that this is the only Outback that is having any problems that they know of. They said it left the factory pulling 72lbs and was is spec. At the pro shop we pulled it on three different scales, one hand held and two diiferent $1300 dalton digital scales, it will only pull 66 lbs. The limbs are cranked down and the brace height is only 7 3/8 with the ATA 32 3/4. Buy the way the cam alignment holes show the cam is over rotated. Nothing is in spec. I don't know what Mathews means buy all is well with this bow and they don't see anything wrong. I will be driving 5 hours this Tuesday to see a trusted friend, pro shop owner and one darn good bow tech to see what he can do. Anyone want to give this a go?