ewolf

Bare shaft groups will be bigger then fletched shafts, but the middle of the group should be the same. Its either spine or touque. What i would do is give the limb bolts half a turn in. It should bring the bare shaft to the left. I always shot bare shafts in practice, all the time. If you notice with time the bare shafts move to the left, it was hand torque(Assuming tourque gets better). Therefore you would have to take turns off the bolts. Do some reading on hand position, but the bare shafts should hit with the fletched shafts. 2 inches is good but none is better. Its all about how anal you are.