ORIGINAL: bowtech justice
Can you adjust this cam say from a 29 to a 29.5 draw without a module change. I was looking at 1 at a shop and the guy said you just had to move the string. Thanks
On the Justice, the best way to change the draw length to 29 1/2" is to put a F#1.5 module in it and set the draw stop on the 6.7 mark for 80% let off.
If you try making it 29 1/2" draw by simply moving the draw stop, it will cause the cam to over rotate and may cause cable damage.
NOTE*: The bow string must run around all of the posts on the post feed system. Not doing so can cause damage to the bow.
If you have any more questions, please feel free to e-mail me at
[email protected]
Regards, Pat