I have both the inertia and the collet type and I'm sorry NoMercy but this is probably the first time I've ever disagreed with you (at least partially). I've used my inertia puller thousands of times and I've never damaged a bullet nor had powder fly all over. I do have a piece of dense foam at the bottom to protect the bullet tip and once it is out of the case I dump the entire contents into a plastic bowl recovering almost every grain of powder and the bullet. With the collet type puller I have damaged bullets because they had to be gripped too tightly to be pulled because of a crimp. But they do work very well for pulling light bullets as you mentioned. Like a .223. I have collets for 22, 270, 7mm, 30, 8mm and 45.
So to answer the post, if you're only going to be pulling a few bullets now and then I would save my money and go with the inertia puller.