Hey Guys, I got a new Bear Attitude, 60 lb model. When in the relaxed state, the string is approx 3/16 clearance from the lower cam. When pulling back, at approx. half way and to full draw, the string rubs on the cam. I sent it to the shop and they changed the lower axle pin but its exactly the same. Now their telling me its normal. I have 3 other Bear bows and they do not touch at all.

I came across a new PSE Stinger X, 70 lb model, and just checked it and its the same. Both new bows when pulling back, at approx. half way and to full draw, the string rubs on the cam. The string does not stop at the center of the draw stop.

My question is, does anyone else have this issue and is it ok?