HuntingNet.com Forums - View Single Post - switched to vanes. sighting problems
View Single Post
Old 07-05-2014, 06:41 PM
  #5  
VT Outfitter
Spike
 
VT Outfitter's Avatar
 
Join Date: Jul 2014
Location: Vermont
Posts: 37
Default

Anytime I make changes to different arrow companies, different rest, or changing of any part on my bow I always start over with the sighting in process. I switched from Gold tip arrows with the short blazer vanes to Victory VAP with short blazer vanes. The sight I have and am really happy with is the single pin adjustable yardage with a wheel by HHA. It is a drop away rest that comes with different sticky tape strips for different lb draw bows. You sight in at 20 yards, make a mark with a pencil on the blank starter strip. Then sight in at 40 yards, make a mark on the same blank strip. You then match the strip to the other finished strips provided, now your sighted in from
0-60 yards. When I made the arrow diameter change from Gold tip to Victory, I had to change to a tighter group marking strip. As long as your arrows are grouping, I would just re-sight your sight pin, as long as the arrow is clearing the rest when released. I hope this helps. Good luck to you this season!

Whitetail Strategies Guide Service
Fred Scott Owner/Head Guide
VT Outfitter is offline