The term "tack driver" when applied to rifles is an imprecise term referring to small group size, and does not refer to the trigger. One man's "tack driver" may shoot 1.5" groups, and another man's "tack driver" is capable of 0.3" groups.
Now, on to your extraction issue. Please answer the questions Big Z asked. Since you are shooting factory Federals, it is unlikely that the loads are the problem. I suspect that the problem lies either with the extractor, or with a rough chamber, or both. Never, never grease a chamber, except for storage, and in that case, remove the grease before firing the rifle.