Was kinda board today so decided to try this again... I really didnt have much around the house to use as test material... I found two pieces of 1/2" fire board that has a very thin gauge metal wrapped around it... It is used to set behind your wood stove for wall protection from the heat...

Anyhow i only had two sheets so i opted to set them out at a measured 50 yards... I shot one with Win HV 3.5" 2oz #4's going 1300fps threw a Kicks GT...

The other was shot with a Hevi 13 3.5" 1 3/4oz of #6's 1090fps threw a jelly head choke...

The Win #4's all went threw the fire board hitting the sheet metal and leaving very pronounced dents...

The Hevi13 #6's all the pellets DID NOT pass threw the fire board and the dents WERE NOT as pronounced as the #4's...

This is the second test that I've done and both times the Win HV #4's out performed the Hevi13...

I dont know what to say but I will not be using them...


THE ONLY ADVANTAGE I SEE IS PATTERN DENSITY...