I am attempting bare shaft tuning for the first time and I am having some trouble. I started by paper tuning and couldn' t get rid of nock high right problem so I decided to try the BS tuning. My bare shafts are hitting way low and left at 15 yrds. According to Easton I should start by moving my nock point down and this hasn' t helped. Now my arrow has a distinct upward aim as it sits on the rest and I cant move sights up any higher to compensate for this. My nock point is obviously too low. Any ideas on how to help the problem would be appreciated. I am shooting a Reflex Denali at 66 lbs with Goldtip 5575 arrows and 75 gr points. 29 in draw and a D-loop. The rest is a GKF shootout with the lower prongs of the fixed screw type (no give to them) as the springy ones were LOUD. Thanks in advance for any advice.