HuntingNet.com Forums - View Single Post - scope power when sighting in
View Single Post
Old 09-22-2009, 05:32 PM
  #7  
Mojotex
Nontypical Buck
 
Join Date: Jan 2008
Location:
Posts: 2,186
Default

In general, I sight in at the highest "X", then check the entire range ... in your case 3X, 4X, 5X, etc. It is very important to make sure that the Point of Impact (POI) does not change as you move through the range. Less expensive scopes often have this as a typical QA problem. Not that high-end scopes are totally immune. But you'll never know if you do not check.
Mojotex is offline