I bought my first compound, a slightly used Diamond Rock a while ago and I need to change the draw lenght from what I believe was set at 29" to 30" also. I know that I have to change modules, but for now I have just moved the draw post to max(towards the 10 number) but the manual says never move the post more than 1/2 mark from factory setting, whitch was set at 5. Why should I not move it more than 1/2 mark, what could happen? I will get the modules needed as soon as possible and I have ordered a bowmaster bowpress to do the job. I dont see how I can change modules without a press, wouldn`t it `blow up in my face`if I just start unscrewing the limbs?
Originally Posted by
txjourneyman
Order it direct from Diamond and change it yourself. No press is needed to make the change. It is held in by three allen screws.
So can I shoot with the drawpost set at max or do I have to move the drawpost back to factory setting?
Do I need a bowpress to change modules?
As I am new to compound bows I really should get someone to tune my bow but unfortunately there are no bow shops in my area. So please help a rookie out
