HuntingNet.com Forums - View Single Post - Mechanicals not hitting same as field points?
Old 08-17-2003 | 10:40 PM
  #2  
Dan324
 
Joined: Jul 2003
Posts: 77
Likes: 0
Default RE: Mechanicals not hitting same as field points?

Broadheads usually add about an inch to your arrow. This will change the arrow spline. Check your arrow chart to see if the arrow you are shooting is on the border line for proper spline. If so, the extra inch your mechanical has added to arrow length may have put you over the edge causing erractic flight. Changing to a heavier splined arrow will solve this problem.

Good luck,

Dan
Dan324 is offline  
Reply