Originally Posted by
bigcountry
Rest adjustment more than 1/16" from center is not good. Trying to make the wrong arrow work with the wrong bow is never good. You might be able to get it BH tuned eventually but groups will always be sloppy.
True,I would question any shop that would be moving the rest to get rid of a 6" tear.There is obviously something else going on.Too much torque from a fallaway.Excessive cam lean.Fletching contact or improperly spined arrows.I even doubt shooter torque would cause that bad of a tear but it might part of it.
This is where you should start,not cranking the rest so far out of centershot that even a pro would have trouble getting solid groups.