Originally Posted by
Ridge Runner
OK, have read alot of reports about heat sensativity of RE22, if you've shot the load before with no problems, then in August you start having pressure problems I'd look into that.
In the gibbs when I was blowing primers by the handful, it was summertime and it was RE22. have you checked MV's lately?
here's a link of some AI/105 gr loads, but they don't list RE22
http://www.reloadersnest.com/query_b...lletWeight=105
maybe you can find something here that you can use.
RR
Thanks RR, I think I figured it out...I'm pretty sure they were just too hot. I went back and looked and out of the 6 that failed, they were all shot 3 times (one fireform, two full power) so I'm thinking they were just to hot and opened up the primer pockets. I'm going to toss all the 3x brass and start over with 2x and fresh brass...
MV started at 3400, now it will be down around 3250...