Those kind of Peeps can rotate, I still use the type of peep with a tube aligner. I own a Copper John Dead Nuts Pro, Basically the same thing as the Hunter but with a seperate adjustment for the cant of the bow. I would try drilling the peep out. If you have no way of taking the peep out I would suggest just taking a drill bit and working it through the peep by hand. But this still doesn' t make sense to me with a 1/4" peep you should be able to see the whole sight. Maybe you could try mounting it one hole father foreward on your bow . My copper john has three sets of holes to mount the sight to the bow. If you have it all the way as close as it goes to the riser try the middle setting. Hope this helps.