Here you go:
http://www.huntingnet.com/forum/tm.aspx?m=3309234&mpage=1&key=&#331880 7
As for pulling the strings and cables tight to set the lengths. I just use a board with a big nail on one end. Keep in mind you're measure from the end of the loop to the end of the loop (outside measurement) I pre measured the lengths and made marks on the board.Then, hook one end of the cable on the nail put a nail through the other loop and pull as hard as you can and see where it comes up in relation to your pre measured mark. Twist or untwist and remeasure until its exact. Put it back on the bow and move on to the next.