ok so here it is
im trying to set up my new bow with a spot hogg whammy drop away restbut im getting a few problems
first ive noticed that the string on the marquis is not running center it is centerd on the top wheel and to the left side on the bottom cam

so how do i set the bow up for vertical?

with the rest in place if i set the arrow up as level in line with the rest attachment holes the arrow is to low and i get clearance problems even with my blazers?

and the rest hits the riser if i try to raise the nock point to give clearance to the rest so as to not hit the riser the arrow is to close to the top string suppressor

also no matter how i set the arrow up for center shot (which is very hard to find) i get clearance problems on the cables if i turn the nock for clearance on the cables they hit the arrow rest bottom bar

there just doesnt seem to be a way around it?

also trying to find center shot is diffucult with the slanted string i used a new idea i came up with makeing a type of plum bob idea and when it lines up with the center of the riser under the handle the arrow is to far to the left if i center it with a centering tool i have cable clearance problems again

what a lot of problems on what i thought was a good bow
so is it just me or my set uo or has anyone else seen these issues
if someone has set the bow up to work can you please tell me what rest and how please i getting ready to turn it into a boat anchor
nothing seems to get it sorted