HuntingNet.com Forums - View Single Post - loading for 30-06
View Single Post
Old 11-19-2008 | 04:02 PM
  #15  
ACLakey's Avatar
ACLakey
Fork Horn
 
Joined: Feb 2003
Posts: 300
Likes: 0
From: Klamath Falls, Or
Default RE: loading for 30-06

ORIGINAL: eldeguello

There are more different loads for the .30/'06 than the number of dollars Bush is asking for in the big bank bailout! The problem with "pet loads" is that a pet load is merely a pet load for the gun in which it was developed!

However, there are some powders that usually do well in certain rounds. And for the old '06, IMR 4064 is certainly one of these. A very good accuracy load for the M1 Garand has always been 47 grains of IMR 4064 and the Sierra 168-grain Match King bullet.

These powders are alsogood: RL 15,RL 19, IMR 4895,H414, WW 760, and IMR 4350 too, if you get the right amount. In addition, the new Alliant RL 17 looks promising in rounds having bore capacities in the same range as the '06.......

Good luck!
I would agree with you, but over the years in several different rifles a load of 57gr H4350 in front of 165gr bullets has always been a solid performer. Some guns like a little more or less, but that load has been a reliable killer for many hears.
ACLakey is offline  
Reply