HuntingNet.com Forums - View Single Post - arrow wizzards question
View Single Post
Old 10-21-2008, 12:46 PM
  #8  
Roskoe
 
Roskoe's Avatar
 
Join Date: Mar 2005
Location: Colorado
Posts: 4,127
Default RE: arrow wizzards question

I get away with a little bit of this on my Hoyt Vectrix XL. Normal arrow is the Axis FMJ. I have some old CE Terminators that weigh about 505 grains and are about .310 diameter.Very tough arrow - good for stump shooting.

It seems like the combination of the extra weight and the slightly higher position (1/32") on the arrow rest balances out to where the fatter heavier arrow hits the same as the slim FMJ at 20 to 25 yards. Past that, though, the Terminator starts dropping off - but not real bad. About 4" low at 60 yards. And accuracy isvery good. You probably wouldn't want to try this with a Whisker Biscuit, but the QAD Ultra drop away seems to handle it fine.
Roskoe is offline