Buck for Team #9 Red Mist Brothers

Right: Left:
25 1/8MB 25 1/8MB
5 4/8G1 5 4/8G1
7 0/8G2 5 0/8G2
8 4/8G3 8 3/8G3
n/aG4 n/aG4
4 4/8C1 4 4/8C1
4 0/8C2 3 7/8C2
3 6/8C3 3 7/8C3
3 5/8C4 3 2/8C4
Spread: 19 3/8

Total:
140 7/8 Gross





Counted.

Score 88 5/8 Team 4 kellyguinn

IS 13 5/8
MB 14 3/8 14 4/8
H1 3 6/8 3 7/8
H2 3 1/8 3 1/8
H3 2 4/8 2 4/8
H4 1 6/8 1 7/8
G1 3 5/8 3 5/8
G2 6 5 2/8
G3 2 3/8 2 6/8






Counted.

Here is one that I killed on Veteran's Day in Arkansas.

It scored 94 4/8 on the B&C website. The tag is in the left ear of the buck.








Counted.

Buck & Doe for Team #11

Left MB 14 4/8 Right MB 13 4/8
Left G1 1 4/8 Right G1 6/8
Left G2 6 2/8 Right G2 7 0/8
Left G3 4 4/8 Right G3 6 0/8
Left H1 3 1/8 Right H1 3 2/8
Left H2 3 0/8 right H2 3 1/8
Left H3 3 0/8 Right H3 2 4/8
Left H4 2 0/8 Right H4 2 0/8

Inside Spread 11 0/8




Total is 87 0/8 + 50 for the Doe



Attachment 23978

Attachment 23979


Counted.

Hate to say it, but without a G4 on the left, you can't score a C4 on that side.....

I explained that by the time that I got the deer checked, no one was around to take my picture with the gun and tagged deer. Mot I took a picture with the deer (tagged) and the gun. Mi posted another picture with the deer and myself, but this was before it was taken to the check station, so the deer hadn't been tagged.

There are actually no G4s on this buck at all. A point must be atleast 1 inch long, and longer than its base per B&C scoring rules. No G4s and no C4's (h4) should be counted on this buck.

Someone correct me if I'm wrong

It doesn't matter if he has G4's or not, he's still going to have 4 C or H measurements on each antler. You are right about antler length. A point must be at least one inch to be counted in the measurements.

The right g4 does measure 1 3/8 from tip to base, but going back it measures 2 6/8 along the base so nebbuckhunter is right - since the base is wider than the length it shouldn't be counted as a point. my mistake, I wasn't aware of that rule and orignally counted since it was just over 1 inch. i've updated my score in the original post. regardless of whether there is a g4 or not, you still take c4 measurements:

on the left antler i did take the c4 measurement halfway, so i did the same thing for the right and it measured 3 5/8."