HuntingNet.com Forums - View Single Post - [Deleted]
Thread: [Deleted]
View Single Post
Old 11-02-2002 | 01:42 PM
  #5  
Hawker
 
Joined: Feb 2003
Posts: 20
Likes: 0
From: North Richland Hills/Wapanucka OK TX
Default RE: Helical fletching?

I always shot mechanical broadheads. Recently went with Muzzys. Mechanical always shot the same as field points. When I shot the Muzzy practice blades I was about 12 inches low and 6 inches to the left. I had 4" fletching so I stripped off the fletchings and aligned my broadheads with my new 5" fletchings with a slight offset (don't know how many degrees offset). The were dead on after this. Shooting a 70-lb bow 29" draw and with Game Tracker CX Hunter 300 and 125 gr. 3 bladed Muzzys. The alignment of the broadhead with the fletchings and the longer 5" fletchings is what I believe corrected the problem.

The harder I work, the luckier I get!
Hawker is offline  
Reply