HuntingNet.com Forums - View Single Post - My OLD T/C Hawkens with a new look
View Single Post
Old 03-07-2006, 04:47 AM
  #6  
lonewolf5347
 
Join Date: Feb 2003
Location: LEVITTOWN N.Y. USA
Posts: 506
Default RE: My OLD T/C Hawkens with a new look

I used Formby's tung oil after about 5 coats I wet sand with 600 grit wet and dry paper ,then keep applying the tung oil until the pours are filled,may give a light pass with 0000 steel wool somewere around 12 coats and just finish up with tung oil I also find I like the low sheen oil.
I think your finger prints are coming from the johnson paste wax
lonewolf5347 is offline