A good way to set up quickly next time you load this same bullet is to make a dummy round and label it with a marker as to bullet weight and style.Then when you want to load this same bullet you back your seating stem off several turns and then back your main die body off a few turns also. Place your dummy round into the shell holder and lower the handle on your press all the way to the bottom, then gently screw the die bodt dowm until you feel slight contact. Lock your die and gently screw your seating stem down until it also contacts the bullet ,lock it and remove your dummy shell and save it until next time. This way when you change bullet types you can use the correct dummy round to set up quickly, and know you'll be right. By the way a dummy is just a shell without primer or powder.