I'm going tohazard a guessthat it probably is too tight for a 3.5" shell. That's a tight fit for a large load. If you shot 2 3/4" or 3" #6's through the same gun, it might work ok.
Location: The place that Harry Henderson calls home....
Posts: 1,672
RE: 31/2 inch + .655 choke to tight?
I think 0.655 is too tight for any of today's turkey loads, regardless of shell length.
About the minimum I would go is 0.670...especially if you're considering using composite (non-lead) shot loads.
__________________
"The first requisite of a good citizen in this republic of ours is that he shall be able and willing to pull his own weight." Theodore Roosevelt
Depends on what gun you have and what load you are wanting to try. If you stick with quality lead loads, then they might work ok in a .655". I would recommend you stay with 6s from that tube. With Hevi-Shot, Win Extnd, Nitro etc you don't want to go below .660-.670 in most 3.5"ers. The only way to know is to simply try it but like I said, stick with lead in that much constriction.
31/2 inch + .655 choke to tight?
