logo
 

Go Back   HuntingNet.com Forums > Archery Forums > Traditional Archery

Traditional Archery Talk Trad-bows here!

Reply
 
Thread Tools
Old 04-05-2009, 12:23 PM   #1
bigcountry
Guest
 
Posts: n/a
Default Min string strands

Is 8 strands not enough for a 60lb longbow of 450plus?

I usually use 12 strand of B50.
  Reply With Quote
Old 04-06-2009, 05:24 AM   #2
Dominant Buck
 
burniegoeasily's Avatar
 
Join Date: Feb 2003
Location: land of the Lilliputians, In the state of insanity
Posts: 24,187
Default RE: Min string strands

Ive never used 450 for anything but compounds. Not sure. I usually use 16 strands of dacron 50 for 60+lb bows.
__________________
kaafir mushrik

Unintended consequences and God have one thing in common: Liberals don’t believe in either of them.

J.F.K. hated liberals.
burniegoeasily is offline   Reply With Quote
Old 04-06-2009, 05:59 AM   #3
Giant Nontypical
 
Kanga's Avatar
 
Join Date: Feb 2003
Location: Burleson TX USA
Posts: 6,455
Default RE: Min string strands

Mark.

8should be enough just make sure to pad the loops and center serving.

I use 10 strands of 450+ on my bows.
__________________
Ignorance is content to stand still with its back to the truth.
Kanga is offline   Reply With Quote
Old 04-06-2009, 06:30 AM   #4
bigcountry
Guest
 
Posts: n/a
Default RE: Min string strands

Quote:
ORIGINAL: Kanga

Mark.

8should be enough just make sure to pad the loops and center serving.

I use 10 strands of 450+ on my bows.
Stupid question I know. But how does one go about padding loops or center serving? I was just going to double serve it.

So when I measure off 7" from the end of my last longest strand, do I add strands same length? Or different lengths?
  Reply With Quote
Old 04-06-2009, 06:49 AM   #5
Giant Nontypical
 
Kanga's Avatar
 
Join Date: Feb 2003
Location: Burleson TX USA
Posts: 6,455
Default RE: Min string strands

Mark.

Just add a couple of strands around 8" or so once you have the loop done you can trim off the extra do the same with the center serving or double serve it either way will work but the double serving might make for tight nock fit.
__________________
Ignorance is content to stand still with its back to the truth.
Kanga is offline   Reply With Quote
Old 04-06-2009, 07:11 AM   #6
LBR
Super Moderator
 
Join Date: Feb 2003
Location: Mississippi USA
Posts: 10,247
Default RE: Min string strands

8 strands is enough (with padded loops), but I don't like it. I've heard from a few folks about smaller 450+ strings breaking without warning. I've also had another stringmaker (Rod Jenkins) tell me he's heard the same. Obviously it doesn't happen a lot, but it does happen.

Padding the loops is easy. I use dacron for the padding, whether it's 450+, Dynaflight '97, or 8125. I cut my strands about 15" long, and stagger them on the ends. For 450+, I like 14-15 strands in the loops (total--for an 8 strand string, add 3 strands of padding in each of the two bundles).

For the center serving, another way to get a good nock fit is use dental floss on the nock point. Just build it up to the fit you want, then add super glue and it should last.

Chad
__________________
"We can have no '50-50' allegiance in this country. Either a man is an American and nothing else, or he is not an American at all."-- Theodore Roosevelt

A wise man's heart is at his right hand; but a fool's heart at his left. Ecclesiasties 10:2

The last four letters in American..........I Can
The last four letters in Republican........I Can
The last four letters in Democrats.........Rats



LBR is offline   Reply With Quote
Old 04-06-2009, 07:23 AM   #7
bigcountry
Guest
 
Posts: n/a
Default RE: Min string strands

Quote:
ORIGINAL: LBR

8 strands is enough (with padded loops), but I don't like it. I've heard from a few folks about smaller 450+ strings breaking without warning. I've also had another stringmaker (Rod Jenkins) tell me he's heard the same. Obviously it doesn't happen a lot, but it does happen.

Padding the loops is easy. I use dacron for the padding, whether it's 450+, Dynaflight '97, or 8125. I cut my strands about 15" long, and stagger them on the ends. For 450+, I like 14-15 strands in the loops (total--for an 8 strand string, add 3 strands of padding in each of the two bundles).

For the center serving, another way to get a good nock fit is use dental floss on the nock point. Just build it up to the fit you want, then add super glue and it should last.

Chad
Whats your favorite Chad for performance from longbows? D97, 450plus, 8125?
  Reply With Quote
Old 04-06-2009, 07:55 AM   #8
LBR
Super Moderator
 
Join Date: Feb 2003
Location: Mississippi USA
Posts: 10,247
Default RE: Min string strands

Seems that the material doesn't make much difference in performance--string weight, how it's made, tuning, nock fit, etc. does more.

I like Dynaflight '97 on bows pulling 50+ lbs, 8125 seems to work a little better for under 50#. 10 strands of Dynaflight is fine for 60#--I think it will be a little smaller than 8 strands of 450+, and I've never heard of Dynaflight breaking without warning. I've had folks order 6 and 8 strand Dynaflight strings, but I haven't tried one.

Chad
__________________
"We can have no '50-50' allegiance in this country. Either a man is an American and nothing else, or he is not an American at all."-- Theodore Roosevelt

A wise man's heart is at his right hand; but a fool's heart at his left. Ecclesiasties 10:2

The last four letters in American..........I Can
The last four letters in Republican........I Can
The last four letters in Democrats.........Rats



LBR is offline   Reply With Quote
Old 04-16-2009, 08:41 PM   #9
bigcountry
Guest
 
Posts: n/a
Default RE: Min string strands

Quote:
ORIGINAL: LBR

Seems that the material doesn't make much difference in performance--string weight, how it's made, tuning, nock fit, etc. does more.

I like Dynaflight '97 on bows pulling 50+ lbs, 8125 seems to work a little better for under 50#. 10 strands of Dynaflight is fine for 60#--I think it will be a little smaller than 8 strands of 450+, and I've never heard of Dynaflight breaking without warning. I've had folks order 6 and 8 strand Dynaflight strings, but I haven't tried one.

Chad
Well, I made up 3 strings tonight with 10 strands of D97 and padded the loops with 6 pieces of B50. Holy cow, this is one small string with 10 strand of D97. I am kinda worried about it myself. Even with serving with .022 brownell, it was cutting in my fingers bad. So I double served overtop the .022 with .018 #62 braid. This was more comfortable on my fingers and had good nock fit.

Anyone else shoot a 10 strand bundle of D97? Its a 60lb zipper recurve.
  Reply With Quote
Old 04-17-2009, 07:24 AM   #10
Dominant Buck
 
burniegoeasily's Avatar
 
Join Date: Feb 2003
Location: land of the Lilliputians, In the state of insanity
Posts: 24,187
Default RE: Min string strands

Ive never used anything but dacron 50. I am curious if there is a noticeable improvement going with a much thinner string.
__________________
kaafir mushrik

Unintended consequences and God have one thing in common: Liberals don’t believe in either of them.

J.F.K. hated liberals.
burniegoeasily is offline   Reply With Quote
 
 
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Excalibur Excel Crossbow String or flemish string? ogg Crossbows 13 07-27-2008 11:38 AM
Drop away rest string tied to Cable slide or String? mystryak Technical 5 01-02-2008 06:46 PM
string leach and string suppressor deertale Technical 1 09-29-2005 10:09 AM
How many strands? zak123 Technical 12 09-19-2005 10:45 AM
string loops slow the string down??? elkcrazedfrk Technical 2 01-31-2005 08:44 PM

 

All times are GMT -8. The time now is 10:12 PM.