Well, I am not too cheap to buy acetone. But I have tons of chemicals I would like to use up. Will denatured alcohol or mineral spirts, or even turpentine degrease IPE or osage for glue up?
One guy said hardwood ash and water works the best.
I have always used denatured alcohol to clean aluminum and carbon shafts without any adhesive problems. I believe that Carbon Express recommends using it to clean their shafts. I had little experience with wooden shafts I was told acetone, denatured alcohol and a list of other things. I finally used a degreasing soap and hot water to clean and rinse then let them air dry. It worked well for me.
I have always used denatured alcohol to clean aluminum and carbon shafts without any adhesive problems. I believe that Carbon Express recommends using it to clean their shafts. I had little experience with wooden shafts I was told acetone, denatured alcohol and a list of other things. I finally used a degreasing soap and hot water to clean and rinse then let them air dry. It worked well for me.
Thats the reason I bought the stuff in the first place a few years ago. I had trouble getting the old school fletch glue to work. I ended up just jumping over to the "super glues" for carbon fletching.
I ended up buying acetone. I don't want to do all this work mating up my bamboo to my IPE and have it come apart.
I ended up buying acetone. I don't want to do all this work mating up my bamboo to my IPE and have it come apart.
Mark
Good move, I do know that turps is oil based so you would actually be putting oil back into the wood.
Russ, why can't you move closer so I can borrow your heat box and use URAC instead of TBIII.
I know building a heat box is a quick thing. I feel like all I do is build tools so I can build bows. I make a tiller stick, I make a tiller tree, I make a form. Now I need a heat box.[:-]
Location: land of the Lilliputians, In the state of insanity
Posts: 24,187
RE: Denatured alcohol to Degrease wood
Quote:
ORIGINAL: bigcountry
Quote:
ORIGINAL: Kanga
Quote:
I ended up buying acetone. I don't want to do all this work mating up my bamboo to my IPE and have it come apart.
Mark
Good move, I do know that turps is oil based so you would actually be putting oil back into the wood.
Russ, why can't you move closer so I can borrow your heat box and use URAC instead of TBIII.
I know building a heat box is a quick thing. I feel like all I do is build tools so I can build bows. I make a tiller stick, I make a tiller tree, I make a form. Now I need a heat box.[:-]
Aceton all the way. By the way, why would you want to use Urac 185 over titebond III. Once I used titebond III, I will never use Urach 185 agian. Epoxy is way more messy than titebond, and Ive had better results with it as well. All my wood to wood applications get titebond over urac.
Make a heat box. Real easy to do. You can make a real cheap one with foam insulation and three lights. Just tape the insulation into a box, big enough to place your form in. Put your lights on the bottom and you got it. Looks like a big foam cooler. If you need it hotter, place a blanket over it. If you need it cooler, crack the top. Ive made a complete oven, this way, under 20 bucks. Ive also made them with stove pipe and a heat gun. Ive even baked bows in a car with the windows up, and parked in the sun on a hot day. Get creative and you can figure out some easy ways to bake a bow.
__________________
kaafir mushrik
Unintended consequences and God have one thing in common: Liberals dont believe in either of them.
I ended up buying acetone. I don't want to do all this work mating up my bamboo to my IPE and have it come apart.
Mark
Good move, I do know that turps is oil based so you would actually be putting oil back into the wood.
Russ, why can't you move closer so I can borrow your heat box and use URAC instead of TBIII.
I know building a heat box is a quick thing. I feel like all I do is build tools so I can build bows. I make a tiller stick, I make a tiller tree, I make a form. Now I need a heat box.[:-]
Aceton all the way. By the way, why would you want to use Urac 185 over titebond III. Once I used titebond III, I will never use Urach 185 agian. Epoxy is way more messy than titebond, and Ive had better results with it as well. All my wood to wood applications get titebond over urac.
Make a heat box. Real easy to do. You can make a real cheap one with foam insulation and three lights. Just tape the insulation into a box, big enough to place your form in. Put your lights on the bottom and you got it. Looks like a big foam cooler. If you need it hotter, place a blanket over it. If you need it cooler, crack the top. Ive made a complete oven, this way, under 20 bucks. Ive also made them with stove pipe and a heat gun. Ive even baked bows in a car with the windows up, and parked in the sun on a hot day. Get creative and you can figure out some easy ways to bake a bow.
Well, I only need the heat box for Epoxy glue ups. I am just having some trouble getting real good mating with things. And know that TBIII isn't gap filling at all.
Other than that, I figured a heat box would be handy for making hickory bows and keeping em dry. Drying out my boo. Other than that, not sure if need it.
Location: land of the Lilliputians, In the state of insanity
Posts: 24,187
RE: Denatured alcohol to Degrease wood
Quote:
ORIGINAL: bigcountry
Quote:
ORIGINAL: burniegoeasily
Quote:
ORIGINAL: bigcountry
Quote:
ORIGINAL: Kanga
Quote:
I ended up buying acetone. I don't want to do all this work mating up my bamboo to my IPE and have it come apart.
Mark
Good move, I do know that turps is oil based so you would actually be putting oil back into the wood.
Russ, why can't you move closer so I can borrow your heat box and use URAC instead of TBIII.
I know building a heat box is a quick thing. I feel like all I do is build tools so I can build bows. I make a tiller stick, I make a tiller tree, I make a form. Now I need a heat box.[:-]
Aceton all the way. By the way, why would you want to use Urac 185 over titebond III. Once I used titebond III, I will never use Urach 185 agian. Epoxy is way more messy than titebond, and Ive had better results with it as well. All my wood to wood applications get titebond over urac.
Make a heat box. Real easy to do. You can make a real cheap one with foam insulation and three lights. Just tape the insulation into a box, big enough to place your form in. Put your lights on the bottom and you got it. Looks like a big foam cooler. If you need it hotter, place a blanket over it. If you need it cooler, crack the top. Ive made a complete oven, this way, under 20 bucks. Ive also made them with stove pipe and a heat gun. Ive even baked bows in a car with the windows up, and parked in the sun on a hot day. Get creative and you can figure out some easy ways to bake a bow.
Well, I only need the heat box for Epoxy glue ups. I am just having some trouble getting real good mating with things. And know that TBIII isn't gap filling at all.
Well, that would be a good reason.
__________________
kaafir mushrik
Unintended consequences and God have one thing in common: Liberals dont believe in either of them.
Denatured alcohol to Degrease wood
Victims Aren't We All
