Old Glory center shot

sjb3 · 02-22-2005, 04:42 PM

Just wondered what the center shot measurement was on your Old Glory? Thanks sjb3

PA Hardwoods · 02-22-2005, 05:40 PM

1 7/8" on the dot. That is from the inside of the rest mounting bracket to the center of the launcher.

ampahunter · 02-22-2005, 08:08 PM

From the 'inside if the riser', (left side of the riser, if it's a right handed bow) it is 1-1/16" to center shot.

ijimmy · 02-23-2005, 05:57 AM

Around 7/8s to 15/16s for me

jmac_or · 02-23-2005, 08:30 AM

1 7/8" from the inside of the rest, at least on mine. Dead on there.
JMAC

muzzyman88 · 02-23-2005, 09:43 AM

I'm shooting an Allegiance and it came in at roughly 1 7/8 from the inside of the rest mounting bar. I think thats the best place to start on these bows to get you real close.

Matt / PA · 02-23-2005, 11:09 AM

Remember all of these risers carry their own unique geometry....don't just apply what works for one to every model.

The Allegiance and Old Glory are 2 different animals.....
My Centershot, and the measurement that is giving me perfect bullet holes is just a hair over 15/16" off the near side on my Old Glory.