? on Merlin Quest

polack · 03-05-2002, 01:56 PM

What needs to be done to change a Merlin Quest twin cam draw length from 30" to 27"?
Polack

Pinwheel 12 · 03-05-2002, 03:00 PM

You should have an "H" module on it. (check the bottom cam module for the letter) If so, then you'll need to drop down to a F1 module. If you do not have an "H" module on it, or if you are looking for modules, e-mail me for further details. Good shooting, Pinwheel 12

pdq 5oh · 03-07-2002, 07:51 PM

Polack, don't you dare bid on that bow!! <img src=icon_smile_big.gif border=0 align=middle> Sounds like a good deal.

Phil.

Pinwheel 12 · 03-08-2002, 04:49 AM

For $425 you can't go wrong, but be aware that it may not have an "H" module on it, and to drop down that 3" to 27", it may possibly need a smaller cam, which would be bigger dollars. Draw weight will also change with each module (drawlength) change. Make sure you find out beforehand which mod is on it, and then contact either the factory or myself for more details. Pinwheel 12

Edited by - Pinwheel 12 on 03/08/2002 05:58:24

polack · 03-08-2002, 01:45 PM

You guys are very observent, I did look at it but maybe after pinwheels statements I will be better off looking at new. I have been in touch with Larry Wise here in Pa. and am waiting on prices and when I can get down to see him. There doesn't seem to be a retailer of Merlin products in Northeast Pa.
Thanks
Polack

bugsNbows · 03-08-2002, 03:31 PM

Ebay bow... $425...definately an "H" module. I know this because it's mine.

bugsNbows · 03-08-2002, 03:31 PM

Ebay bow... $425...definately an "H" module. I know this because it's mine.