logo
 

Go Back   HuntingNet.com Forums > Archery Forums > Technical

Technical Find or ask for all the information on setting up, tuning, and shooting your bow. If it's the technical side of archery, you'll find it here.

Reply
 
Thread Tools
Old 08-16-2004, 04:06 PM   #1
 
Join Date: Feb 2003
Location: USA
Posts: 439
Default Can't get rid of left tear!

Bow - FX - 29.5" @ 63 lbs.
Arrow - GT 55/75 @ 27.5"
Point weight - 100g
3-4" feathers, 4 degree left helical
Rest - MZE

This is the bow that was dry-fired this past weekend by one of my "students". Everything seems to be ok - I have shot the bow at least 40 times since Saturday, and all is well (grouping well out to 35 yds). Shot it through paper - left tear (not too bad, but definitely needs some tweaking). I move the rest to the left in 1/8" increments -- tear gets worse. I tried three different arrows (same weight, length, ect.) -- same result. I AM NOT tourquing the bow!! The bow shot perfect holes about three weeks ago - I am not noticing any fish-tailing during flight. The peep was split in two when the dry-fire occurred, so I have been shooting without it and have found I am every bit as accurate as before (might keep it that way!!). Any suggestions??
__________________
Mighty Mite VFT, Muzzy ZE Rest, 260g Gold Tip XT' s/Feathers, Magnus Stinger 100g, No Peep with a bored peep, King Cobra sight, limbsavers, Cat Whisker string silencers, Vibracheck stabilizer, String loop, Scott release, 29 inch DL, 62 lb, 283 fps.
Roseaukaine is offline   Reply With Quote
Old 08-16-2004, 04:08 PM   #2
 
Join Date: Feb 2003
Location: USA
Posts: 439
Default RE: Can't get rid of left tear!

Forgot to mention - the distance to the paper was 6' - at 12' the tear is still there.
__________________
Mighty Mite VFT, Muzzy ZE Rest, 260g Gold Tip XT' s/Feathers, Magnus Stinger 100g, No Peep with a bored peep, King Cobra sight, limbsavers, Cat Whisker string silencers, Vibracheck stabilizer, String loop, Scott release, 29 inch DL, 62 lb, 283 fps.
Roseaukaine is offline   Reply With Quote
Old 08-16-2004, 04:14 PM   #3
 
Join Date: Aug 2004
Location: Bessemer, MI
Posts: 220
Default RE: Can't get rid of left tear!

I'm thinking you should be moving the rest to the right, not left......at small increments. Hope I read that right. Good luck.
legacy22 is offline   Reply With Quote
Old 08-16-2004, 04:30 PM   #4
 
Join Date: Feb 2003
Location: USA
Posts: 439
Default RE: Can't get rid of left tear!

For clarification -- the nock end of the arrow is tearing left of the field tip.
__________________
Mighty Mite VFT, Muzzy ZE Rest, 260g Gold Tip XT' s/Feathers, Magnus Stinger 100g, No Peep with a bored peep, King Cobra sight, limbsavers, Cat Whisker string silencers, Vibracheck stabilizer, String loop, Scott release, 29 inch DL, 62 lb, 283 fps.
Roseaukaine is offline   Reply With Quote
Old 08-16-2004, 04:37 PM   #5
 
Join Date: Feb 2003
Location: Illinois
Posts: 1,862
Default RE: Can't get rid of left tear!

A "nock left" tear requires that you move the rest to the "right."
c903 is offline   Reply With Quote
Old 08-16-2004, 08:00 PM   #6
 
Join Date: Feb 2003
Location: USA
Posts: 439
Default RE: Can't get rid of left tear!

I will try moving to the right, but I was under the impression that one must move the point of the arrow (rest) where the fletchings are tearing the paper in order to get a "bullet hole". Thanks for the advise - will do!
__________________
Mighty Mite VFT, Muzzy ZE Rest, 260g Gold Tip XT' s/Feathers, Magnus Stinger 100g, No Peep with a bored peep, King Cobra sight, limbsavers, Cat Whisker string silencers, Vibracheck stabilizer, String loop, Scott release, 29 inch DL, 62 lb, 283 fps.
Roseaukaine is offline   Reply With Quote
Old 08-16-2004, 08:03 PM   #7
 
Join Date: Aug 2004
Location: Bessemer, MI
Posts: 220
Default RE: Can't get rid of left tear!

Quote:
I move the rest to the left in 1/8" increments -- tear gets worse.

Thats why it kept getting worse. You were moving it in the wrong direction. This will work out for you, I hope. Good luck!
legacy22 is offline   Reply With Quote
 
 
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Cannot tune out Nock Left Tear ksdeerhunter007 Technical 7 08-10-2007 07:03 PM
1/2" High Left Tear H80Hunter Technical 7 07-14-2005 02:43 PM
Woo Hoo Fixed my left tear WA Shooter Technical 1 05-06-2004 06:22 AM
Help!! Frustrating left nock tear!!! ohiogleanerman Technical 13 03-19-2004 05:42 AM
High left tear? RidgeRunr Technical 11 04-27-2003 02:30 PM

 

All times are GMT -8. The time now is 09:26 PM.