supertec spec problem??

[oniedaeagle]

my buddys supertec is brand new and the spec are ata 35 1/2 inch suppose to be 35 inch and the brace height is 5 3/4 inch suppose to be 6 inch how do i fix this just bought a new bow press..

[Paul L Mohr]

The specs are not always exact. It depends on the draw length and weight setting sometimes I think. That is why when you get a new bow and get it set up the way you like it you should measure everything and write it all down for future referance. If the bow is timed and every is set the way he wants it, I say don't mess with it. Just write down the measurements and shoot it.

I am curious to see if one of the local hoyt techs will agree with me however. I know my darton with a 26 draw length and 55 lbs of draw weight was not exactly what it was suposed be, but it was close.

Paul

[oniedaeagle]

his draw lenght 29 inch and set at 70 #

[PsuWeasel]

The specs are right on according to the lsited specs on the tune chart provided by Hoyt.

Here's the link.....http://www.hoytusa.com/technical/MyC...28961013918443