If you want to shorten your DL by up to 1/4" by manipulating the string/cable on a SC bow, you ______ to shorten the ________ until you reach the desired length then you _______ the ________ to re-time the cam.
Choices are string, cable, twist and un-twist.
Right?
__________________
Genesis 27:3
"œNow then, get your weapons "” your quiver and bow "” and go out to the open country to hunt some wild game for me."
Problem with that method is that when you adjust one thing (i.e. string or cable), manipulating the other the opposite way brings the cam back to the same place..not always exactly but you end up losing the amount of adjustment you wanted in the first place.
__________________
Shoot what you like and have confidence in - don't get wrapped up in popularity contests
Or..you can get a BowTech cam or some other design that has half inch adjustment increments and a precisely adjustable draw stop and not have to worry about it
__________________
Shoot what you like and have confidence in - don't get wrapped up in popularity contests
So, why does untwisting the cable shorten the draw length, oh ye master of all things trivial?
Because it BLANK the amount of string BLANK on the cam...BLANK it changes the orientation of the cam so it does not let out as much BLANK conversely the opposite is BLANK
Just call me Gene..Gene Rayburn....
:wanders off to find 3 foot long pencil thin 1970's eara microphone:
BTW. next weeks guest players are Soupy Sales, Flip Wilson, and Carol Burnett
Don't change that dial!
__________________
Shoot what you like and have confidence in - don't get wrapped up in popularity contests
So, does untwisting the cable by X directly correlate with a decrease in draw length of X, or is it Y?
If my freaking 28" module was actually 28", I'd be a much happier camper...
Wierd. It's 28.25" and feels just a tad long. However, the Outback I shot a Whileback was supposedly 28", and it felt dead on. Perhaps Mathews addressed their too long DL reputation?
__________________
Genesis 27:3
"œNow then, get your weapons "” your quiver and bow "” and go out to the open country to hunt some wild game for me."
So, does untwisting the cable by X directly correlate with a decrease in draw length of X, or is it Y?
Yes.
Quote:
Perhaps Mathews addressed their too long DL reputation?
Not in my experience. The problem is that Mathews doesn't use an AMO/ATA measurement except for speed tests, they measure to the front of the riser, which usually leaves them about 1/2 to 5/8" long at AMO/ATA standards.
OK seriously about the cable..no...if you untwist the cable 1/4" short/long it will affect the string take-up/feed-out considerably more so than 1/4".
__________________
Shoot what you like and have confidence in - don't get wrapped up in popularity contests
Refresh my memory, fill in the blank fun
