I have a archers choice 3-pin sight w/ the wraped pins. The problem I have is that the wraps on the pins buzz after releasing the arrow. Is there any cure for this or is it that big of deal in the first place?
__________________
If its Brown; Its Down!!!!!
Renegade Trophy RAC Plus
68# draw 29" D/L
340 Easton Epic w/ 100 gr. tips
No-peep (of course)
Game tracker First Cut EXP B/H
I have an AC 3 pin sight and mine have never buzzed. You might check to make sure all the pins are tight. Sims does sell some small limb savers for quivers and sights, you might try that. You may also try contacting Archers Choice to see if they have a solution, their solution may be to send you a replacement sight.
matt pa hit the nail on the head
use some clear silicone and let dry
a little dab will do mind you.
__________________
"Minister of Information for the Royal Kingdom of $Tree"...
The common mistake people make when attempting to design something completely Idiot proof is to underestimate the ingenuity of complete Idiots.
Thank you all for all the suggestions, I e-mailed AC and if that leads to no where I will try the silicone thing. This is the best site for any problems I have and the people are the most helpful of anything I have ever found.
__________________
If its Brown; Its Down!!!!!
Renegade Trophy RAC Plus
68# draw 29" D/L
340 Easton Epic w/ 100 gr. tips
No-peep (of course)
Game tracker First Cut EXP B/H
noise problem
The silicone will also protect the fiber to a degree from snags.
