BowTech BlackKnight >>>>-------------->

[walks with a gimp]

I got a chance to shoot a BlackKnight today SPPPEEEED is all I can say!! This one was a 70 pounder with 30 inch mods and I shot a 350 grain arrow through the chrono at 355 fps I then tried one of my own 452 grain aluminum arrows and it went 321[8D] Now, if i've figured this right, that would be 103.44 ft. lbs. K.E. That's enough to hunt trophy colosalmonsters!!!!!!!! Noise was not nearly as much as I thought it would be and though I didn't shoot more than about 10 arrows, accuracy seemed good for the bow being not set up for me. It will give your shoulder a work out though!!!

[AllenRead]

Did the low brace height result in the string hitting your arm more that higher brace height bows?

[Rangeball]

Wow, just thunk if you'da dun it with them there speedpro arrahs...

[JeffB]

ORIGINAL: Rangeball

Wow, just thunk if you'da dun it with them there speedpro arrahs...

It'll do 412..or was it 420?....

where's Vic?

[Rangeball]

Damnation...

Probably still trying to pull the fricking arrows outa the target...

[Mike from Texas]

I'm supposed to shoot Ausie's Black Knight one of these days. He has some 30" modules so I can shoot it in my draw length. I'm sure I'll probably have one next year if I end up liking it. I'd go with a 60#er though, my tendonitis will surely thank me.

[JeffB]

ORIGINAL: Rangeball

Damnation...

Probably still trying to pull the fricking arrows outa the target...

. Vic said he was wearing saftey goggles and everything shooting it through the chrono, LMAO.

I can't remember which it was, 412 or 420.

[Matt / PA]

Jeff I found 500fps's reply about the Speed Pro's and his BK...I was curious too when I heard about someone trying it for giggles. Here's his response:

"I got 412 fps from my 04 BK, 71/29.25, and don't know the exact weight of the arrow....they are 29", 3-3" feathers, 65gr screw in point

Well, I took the string silencers off at the same time I switched out the modules, so there are 2 factors in the increase in speed, but I got 422 fps. The reason the increase wasn't more is that the 29" module AMO's at 29.25", and the 30" mods AMO'd at exactly dead nuts on 30", so you are only increasing draw length by 3/4"
"

[:-]

[Kanga]

WWAG.
Thats smoking
I get 280 out of mine set on 60lb 28" draw with a 400gr arrow thats plenty fast enough for me unless I can con someone else into pullin the arrows

Matt / Jeff

There is no way I would even contemplate using those ultra light arra's out on my BK.

Mike.

Hopefully I wont have the cluster I had today installin these windows so pencil in next Tuesday at Reds

[PABowhntr]

Geeesh, that is fast. I had a chance to shoot one a few weeks ago and was definitely impressed with the speed. A nice, well built bow but a little too short on the brace for me to fall in love with.