logo
 

Go Back   HuntingNet.com Forums > Archery Forums > Technical

Technical Find or ask for all the information on setting up, tuning, and shooting your bow. If it's the technical side of archery, you'll find it here.

Reply
 
Thread Tools
Old 05-13-2004, 09:48 AM   #1
 
Join Date: Feb 2003
Location: Allen TX USA
Posts: 86
Default reflexed and deflexed riser-someone explain please.

I hear preferences all the time but not sure exactly what each does to the characteristics of shooting a bow. Could someone explain or point me in the right direction to read up on this. Thanks!
DeerT
DeerT is offline   Reply With Quote
Old 05-13-2004, 10:07 AM   #2
 
Join Date: Feb 2003
Location: Alvo Nebraska USA
Posts: 2,057
Default RE: reflexed and deflexed riser-someone explain please.

Take a ruler and measure from the deepest part of the grip on your bow to the string and then measure from the limb pocket/limb junction to the string. If the measurement is greater at the grip, your bow has a deflexed riser. If the measurement is less at the grip, your bow has a reflexed riser. Generally a deflexed riser bow will be more forgiving of the shooter's grip/torque/pressure imput and will be easier to shoot accurately than a bow with a reflexed riser. There are bows available with reflexed risers that are very easy to shoot accurately and provide the extra speed that deflexed riser bows lack. Deflexed riser bows usually have higher brace heights and less of a power stroke to the arrow at the shot.
walks with a gimp is offline   Reply With Quote
Old 05-13-2004, 08:42 PM   #3
Nontypical Buck
 
Bigpapascout's Avatar
 
Join Date: Feb 2003
Location: In Teh Garage (Rossville, GA USA)
Posts: 1,159
Default RE: reflexed and deflexed riser-someone explain please.

Reflex and deflex is a term used to explain the geometry of a riser. A deflex riser bow will have a higher brace height than a reflex riser bow which generally means it is a more forgiving bow. A reflex riser bow has a shorter brace height which usually translates into a higher performance bow and perhaps a bit less forgiving than a deflex riser bow. Reflex/deflex is measured by the position of the throat of the grip in terms of its location from a line drawn from each of the pocket pivot points on the handle. If the throat of the grip is in front of the pivot point line it is considered deflex, if it is behind the pivot point line it is considered reflex.
__________________
"Minister of Information for the Royal Kingdom of $Tree"...
The common mistake people make when attempting to design something completely Idiot proof is to underestimate the ingenuity of complete Idiots.
Bigpapascout is offline   Reply With Quote
Old 05-14-2004, 04:57 AM   #4
Super Moderator
 
PABowhntr's Avatar
 
Join Date: Feb 2003
Location: Lehigh County PA USA
Posts: 12,149
Send a message via AIM to PABowhntr Send a message via Yahoo to PABowhntr
Default RE: reflexed and deflexed riser-someone explain please.

Quote:
A deflex riser bow will have a higher brace height than a reflex riser bow which generally means it is a more forgiving bow.
This is normally true but some manufacturers angle their limbs more or increase limb length which can result in a longer brace height though some of these bows can still be more critical to shoot. Just thought I would mention it.
PABowhntr is offline   Reply With Quote
 
 
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
What is a 3 Piece Riser? Geronimo Technical 7 03-11-2008 07:59 PM
Reflexed and Deflexed Risers. whitetailbowhunter Technical 13 01-02-2008 07:18 PM
bow riser silencer kevanddj Bowhunting 3 10-06-2007 06:54 AM
Riser.........What riser? lifesadrag Bowhunting 14 02-10-2007 03:07 PM
2004 Bowtech Riser vs 2003 Bowtech Riser Double Lung Em Technical 2 12-05-2003 10:46 PM

 

All times are GMT -8. The time now is 02:03 AM.