Help With Liberty Letoff

[JoshKeller]

I've got the #2 module on my Liberty, and after reading the manual, I'm still somewhat confused. I was wondering if someone could give me the lines that the post should be lined up with for 65% and 80% letoff. assuming #1 is the closest to the S and #23 is closest to the L. Thanks much

[BowTech_Shooter]

With the F#2 module on it, the post should be set at approx. the 6.7 mark for 80% let off.

To make it 29" draw at 65% let off, you'll need to use an F#1.5 and set the draw stop at approx. the 7.0 mark.

This is counting from the bottom (L) end of the cam to the middle of the draw stop screw head.

The longer lines are the whole numbers and the shorter lines are the 1/2 numbers.

If you have any more questions, please feel free to e-mail me at techman@bowtecharchery.com

[JoshKeller]

Can I order the 1.5 directly from Bowtech, or do I have to get it from the shop? It would just be easier to order it from you than to drive an hour and a half to the shop. Thanks.