fall awy arrow rest problem

oniedaeagle · 02-13-2004, 03:10 PM

i have a bowtech mighty mite and i put a golden key tko fall awy arrow rest on and the rest looks like it needs to be moved a 1/4 inch to the left but the rest is as far left as it will go

what can i do and is this a comon problem or iam eye balling it wrong i need help please the way a find center shot is measure the limp put two lines in the middle of the limb and it should be lined up but it is 1/4 to a 1/8 inch to far to the right

Roland from Calif. · 02-13-2004, 04:52 PM

If you're around .75 to .82 to the center of the arrow from the riser you should be very close to center shot. Everyone is a litttle different but this is going to get you pretty close.

oniedaeagle · 02-13-2004, 05:39 PM

i measured from the riser to the center of the arrow rest it is .70-.75

KBacon · 02-13-2004, 05:48 PM

You have the take the vertical bracket off.. and move it to the other side of the horizontal bracket that attaches to the bow. Should have plenty of adjustment after that.

oniedaeagle · 02-13-2004, 06:48 PM

kbacon this is why i joined this forum thank you very much problem fixed thanks agian

pdq 5oh · 02-13-2004, 10:01 PM

And start center shot at 7/8".

Tosoro Hunter · 02-14-2004, 05:30 PM

Thanks.
That is what my dealer did.

The TKO shot bullets after that.