I guess I need to now as - HOW is optimum position determined ? I have a Fred Bear ' CODE' model bow..... 3 years old, and never got any sort of manual' .... so geeee..... gotta figure this one out.
I am trying to go over my bow and check that all is well and start my shooting for the year.......
I don' t know anything about the bow you have, but most bows have some type of marks or small holes on the cams that should run paralell with the bow string--hope this helps.
__________________
Start planning now to be spontaneous later!
To know if your string has crept, take it off and measure it. Best cam position is best determined by asking the manufacturer for that particular model.
i don' t have any string strech anymore since i make my strings from ultra cam material. if you order strings for your bow try ultra cam it just don' t strech period.
__________________
you can use your pepper spray my 12 gauge with 3 inch slugs works fine
When I bought my new bow I made pencil marks on each side of my cam, drawing a line along the limb. This way I could easily look to see if the line changed at all because of stretch.
__________________
08' Bowtech General
02' Champion Stratus
Detecting String Stretch ??
