Loud creak on draw/SQ2
#1
#2
Usually its in the QCCs, which are the yoke bushings on either side of your axel up top (idler wheel axle).
Its a 5 min fix if you have a bow press. Or take it to the shop and have them press it, pop off those QCCs and put a little light lubricating grease on the inside (limb side) of those bushings.
90% of the time, thats all it takes... no muss.... no fuss.
Good luck.
Its a 5 min fix if you have a bow press. Or take it to the shop and have them press it, pop off those QCCs and put a little light lubricating grease on the inside (limb side) of those bushings.
90% of the time, thats all it takes... no muss.... no fuss.
Good luck.