please, I need more info

[m9a9g9i9c]

Ok,

I have 4 factors that should get resolved in this order, ATA, distance between string and stopper, distance between string and cable attachments and poundage.
I shot my airborne today with ATA correct at 54#, she shoots great but she's a little noisy because of the string slapping into the rubber stopper. There is a slight angle where the string touches the rubber stopper, so no good.
The cables are where they should be, less than 1mm between the cable attachements and the string, so ok.
If I lengthen the string and twist the cables the string touches the cable attachements again, I tried that.
To move the string back outwards (off the rubber ) and get more poundage I should twist the string more or less ? How many twiste can you put on a bowstring ?

F.

[drockw]

I honestly would throw all of that out of the window and get an aftermarket stopper from meanv or someone similar. It will be quieter, AND most likely more consistent. I took the factory stopper off of my General, AND my airborne as well and it made a noticeable difference...

Sorry I cant help with your actual question, but I personally wouldnt sacrifice timing and tuning so the bow will be quieter.

Derek

[m9a9g9i9c]

I have a string suppressor from MeanV and I left the standard one on as well.
I need to have a bowpress and twiddle with it myself, I'm tired of driving 1,5h just to get to my bowshop.

F.