please help with my Cybertec

springer94 · 10-01-2009, 04:29 PM

I would like to go down a size on my cam set on my cam 1/2 Cybertec from an "e" to a "d" which would give me a 27" optimum draw length.Trouble is I can't seem to find one and getting one from Hoyt is like 180 bucks.

I have found a lot of spirals and spiral X cam sets.Does anyone know if I can upgrade to the newer cams.It would be nice just to get the "D" cam set because the only change in what I already have would be the string,all else is the same.

There must be some bow choppa guys out there!Thanks,Ron

dryridge2 · 10-01-2009, 10:44 PM

The answer should be yes. However you have to know what you are doing. You will need a spacer set and new cables/string made if you change cams. There will be no set length you will have to sharp enough to figure it out and then find them. I would leave this to a WELL stocked proshop. I would stay away from the Spiral and SpiralX Cam. The reason you see so many is that they are not one of Hoyts brighter moments.

You may find a set of D cams at Hunters Haven, Elkins WV. (304) 636-9001 ask for Adam. He is very sharp on Hoyt, Mathews and Bowtech.

May be time for a new bow? The new Hoyt is SWEEEET~!

springer94 · 10-03-2009, 05:12 AM

Thanks for the reply,I think that I am only going to settle on the correct cam change and make it easy on myself.Thanks for the direction to the shop,I will ring them up and see if they can help me out.Ron