adjusting draw length on Martin Cougar

charlesdaly · 09-21-2009, 05:01 AM

I need to shorten draw length on my bow. The spec sheet says it can be adjust between 26"-32" without a bow press. I was wondering if someone could help me out with this or do it have to be taken to a bow shop?

wallhangr · 09-21-2009, 07:33 AM

How much do you need to change it?

charlesdaly · 09-21-2009, 08:46 AM

probably 2"-3"

wallhangr · 09-21-2009, 09:36 AM

You'll have to get the correct module, takes removing a couple screws to change them out.

BGfisher · 09-21-2009, 05:37 PM

Do you know what year it is? How about what cams are on the bow. Certain cams need a module change. Other cams have a rotating module. It depends on what cams you have. If you don't know what cams then maybe you could post a picture.

OR, look on the cable side of the cam for a module and see if there is a number/letter designation such as F5, F6 or so. A lot of Martin cams use what we call an "F" module.