charlesdaly, don't worry about the CX broadhead being a cut on contact and not a chisel tip like the muzzy. This broadhead is tough. It is the same head as previous years eastman quad pro. I know the guy who designed this head and am shooting his original version, the flatliner quad pro (eastman, who owns CX bought the rights to this head a few years back from him). I shoot the original because I can get it in an 85 grain variety and we have plenty of replacement blades at his archery shop. The .045" blade thickness will stand up to bone hits and is thick enough that it can be resharpened easily with a handheld scissor/knife sharpener. The blade retention is excellent as well and it flies as good as the slick tricks that I used to use. Plus at only $12.99 a pack they are cheaper than most broadheads, and for not much more than replacement blades you can buy new heads and have some designated practice heads.
I shot a doe on Saturday quartering a way and broke the off side shoulder with about 10" of arrow sticking out through the shoulder. The deer dropped instantly and at the time I thought that I had spined her. As she was thrashing around and trying to get up I took the only shot offered. THe shot went through the right flank (completely shattering the bone in the hind quarter) and rode the inside of the ribcage on the left side (cutting/breaking ribs) and exited the chest.
Both broadheads are back in my quiver after being touched up with a lansky sharpening system. I'm not one for posting pictures of entry/exit wounds and broadhead damage for everyone to see, but I do have the pics. PM if you are interested.
|