[Deleted]

Deleted User · 05-04-2003, 04:46 PM

[Deleted by Admins]

Proff · 05-04-2003, 05:26 PM

Todd I had the same problem when i used the Gold Tip EZ points. I had several that would pull the insert out. I just went back to my regular points. I also now use Powerbond to glue in my inserts and have had no more trouble. But I definitely won' t use the Gold Tip field points any more. I sure love their arrows though.

c903 · 05-04-2003, 05:28 PM

http://216.239.33.100/search?q=cache...hl=en&ie=UTF-8

TFOX · 05-04-2003, 07:07 PM

I like to scuff the inside of the shaft but I think what works the best is taking a small file to the inserts and putting a couple small grooves in various place around the insert.I also use 24 hour epoxy to glue the inserts in and since starting these steps I havn' t had a single insert pull out.

kop · 05-04-2003, 07:25 PM

I had the same problem you had can' t repeat what
I said niether.I use their field tips too there' s nothing wrong with them it' s just the glue you' re useing.Martin archery makes a glue called Brite Site you have to put the inserts in really fast or they will bond before you get them pushed all the way in.I can' t find the stuff any more ecept on their web site.Now I' m useing goat tuff you can get it from cabela' s it works just as good.Hope this helps keep trying.

CG · 05-05-2003, 09:15 AM

Take a 25 caliber or 27 caliber bore brush and scuff the inside.....there' s no way they' ll come out....

BGfisher · 05-05-2003, 06:47 PM

Scuff ' em like some said. And then use 24 hr. epoxy. 5 minute stuff won' t hold.

mez · 05-06-2003, 06:11 PM

I use Krazy glue on my gold tip inserts and have yet to have one pull out. The originals were epoxied and have lost of few of those. Try Krazy glue, cheap and readily available.

Hyawatha · 05-06-2003, 08:19 PM

No cleaning. No scraping. A dab of super glue and spin as you insert it fast!!!!!

I ain' t coming out.