muzzy zero effect and extreme vft

beav · 05-03-2003, 12:34 PM

I was just wondering if anyone has had success with this setup, or with any of the 2003 single cam bowtech bows. I got the trophy taker and it was very tough to set up..... maybe impossible, with the tools they give you. Thanks Beav

Kanga · 05-03-2003, 02:20 PM

All you will have to do is cross the cables above the cable slide and you should have no problem setting the MZE up.

I have one on my Patriot Dually and my Pro40 Dually.

Len in Maryland · 05-03-2003, 07:17 PM

I' ve got an Extreme VFT set up in the shop with a MZE. Stop by and take a look.

beav · 05-03-2003, 08:02 PM

ausie-guy, In the o3 owners manual it says not to cross the cables above the cable slide that it will effect the bows performance?? have you noticed an effect??

beav · 05-03-2003, 08:03 PM

Woops , and why did you have to cross the cables?

Kanga · 05-03-2003, 08:06 PM

beav.
It did not effect the performance at all.
In fact I called Mark at muzzy and thats what he told me to do due to the small amount of movement in the cable slide.

Plus when you take the cable slide off thats where the cables want to cross anyway.

But if you are near Lens shop drop in and have a talk to him as Len has set up hundreds if not thousands of MZE' s.